Pricing guide
How to price a commercial cleaning contract (with a free calculator)
A cleaning bid is only as good as the costs behind it. This guide walks through every cost to include, how production rate turns square feet into labor-hours, why labor burden and overhead matter, and how to set a profit margin without confusing it with markup.
Prefer to skip the math? Sell for Cleaning Lite does every step below in your browser. Free, no sign-up, and nothing you type is sent anywhere.
Open the free calculatorCosts to include
Price from the monthly cost of serving this one account, then add profit. The calculator groups the costs like this:
- Labor: hours to clean the area, plus restroom fixtures, plus any other tasks per visit (breakroom, trash runs).
- Labor burden: payroll taxes, workers' comp and benefits on top of the hourly wage.
- Chemicals and supplies per visit.
- Equipment: this account's monthly share of vacuums, machines and their upkeep.
- Overhead: this account's monthly share of insurance, office, software, phone and similar costs.
- Travel: paid travel time per visit at the loaded labor rate, plus miles at your vehicle cost per mile.
Visits per month are calculated as visits per week × 52 ÷ 12. Holidays are not deducted.
Production rate: square feet per labor-hour
Production rate is how many square feet one worker cleans in one hour in this type of building. It is the single input that moves the price most, because it sets the labor-hours:
labor-hours per visit = area ÷ production rate + fixtures × minutes per fixture ÷ 60 + extra task hours
Use your own timed results, not a number from someone else's building. A carpeted open office, a medical suite and a school restroom wing clean at very different speeds. Count restroom fixtures (toilets, urinals, sinks) separately with your own minutes per fixture, so dense restrooms do not hide inside the area rate.
Labor burden
The wage is not what an hour of labor costs you. Add burden as a percentage of wage to get the loaded rate:
loaded rate = wage × (1 + burden % ÷ 100)
Employer FICA alone is 7.65% of wages; unemployment taxes, workers' compensation and any benefits come on top and vary by state and carrier. The calculator warns you if burden is under 15%. Use the figure from your own payroll and insurance.
Overhead share
Enter only this account's share of monthly overhead and equipment, not your whole company's bill. One simple method: divide your total monthly overhead by the number of accounts, or by labor-hours and allocate by this account's hours. Whatever method you choose, use it consistently across bids, so one account does not quietly subsidize another.
Margin vs markup
Margin is profit as a share of price. Markup is profit as a share of cost. They are not the same number, and mixing them up underprices every bid.
price = total cost ÷ (1 − margin)
markup = margin ÷ (1 − margin)
20% margin → 0.20 ÷ 0.80 = 25% markup
If you add 20% to cost (a 20% markup), your margin is only 0.20 ÷ 1.20 ≈ 16.7%. The calculator asks for a target margin, rounds the price up to the next $5, and shows both the actual margin and the equivalent markup.
Worked example
Example inputs, not market rates These are the calculator's built-in placeholder values. Replace them with your own numbers.
8,000 sq ft cleanable area · 3 visits per week · production rate 3,000 sq ft per labor-hour · 0.5 extra task hours per visit · no restroom fixtures entered separately · $18 per hour wage · 20% labor burden · $6 supplies per visit · $40 equipment per month · $250 overhead per month · 0.5 paid travel hours and 12 miles per visit at $0.70 per mile · 20% target margin · 0% sales tax.
| Visits per month (3 × 52 ÷ 12) | 13 |
| Labor-hours per visit (8,000 ÷ 3,000 + 0.5) | 3.17 |
| Loaded labor rate ($18 × 1.20) | $21.60/hr |
| Labor (41.17 hours) | $889.20 |
| Travel (time + miles) | $249.60 |
| Supplies | $78.00 |
| Equipment | $40.00 |
| Overhead | $250.00 |
| Total cost (break-even) | $1,506.80 |
| Price at 20% margin ($1,506.80 ÷ 0.80) | $1,883.50 |
| Quoted price (rounded up to $5) | $1,885 |
| Estimated profit | $378.20 |
| Actual margin / equivalent markup | 20.06% / 25.1% |
| Price per visit | $145 |
| Billing rate per paid labor-hour | $39.55 |
| Annual contract value | $22,620 |
Profit here is estimated operating profit before income tax and before owner pay unless owner pay is in overhead. The calculator also estimates cash you carry before the first payment ($3,013.60 for these inputs: about one month of service plus 30 days to collect) and runs a risk check on the same price if the crew is 10% slower, the wage rises $1, or the area is 10% larger.
Load these example inputs in one click, then replace them with your building and your costs.
Open the free calculatorCommon mistakes
- Treating markup as margin. Adding 20% to cost gives about a 16.7% margin, not 20%.
- Pricing labor at the bare wage. Leave out burden and every hour costs more than you charged for.
- Borrowing a production rate. A rate from a different building type can be far off for yours. Time your own work.
- Forgetting travel. Paid drive time and mileage are real per-visit costs.
- Loading all overhead on one bid, or none at all. Use this account's share only.
- Hiding periodic work in the monthly price. Strip and wax, carpet extraction, windows and the initial deep clean are better quoted separately.
- Ignoring cash flow. You usually pay a month of wages before the first invoice is paid.
FAQ
Is the calculator really free?
Yes. Sell for Cleaning Lite is free to use, with no sign-up and no account.
Does it send my numbers anywhere?
No. The calculator runs entirely in your browser and makes no network requests. Your inputs are saved only in your own browser so they are there next time; you can clear them with Reset to example or your browser settings.
Where do I get a production rate?
Time your own crews on similar buildings and divide the square feet cleaned by the labor-hours it took. The calculator does not supply production rates; it uses the number you enter for this building type.
Should I think in margin or markup?
Either works if you convert correctly. The calculator asks for a target margin (profit as a percent of price) and also shows the equivalent markup on cost. A 20% margin equals a 25% markup.
Does the price include sales tax?
The monthly price is before tax. If your state taxes this service, enter the rate and the calculator shows the tax and the total with tax. Check your state's rules and enter 0 if the service is exempt.
What does the Lite calculator not include?
Lite does not price these as separate lines: initial deep clean, periodic work such as strip and wax, carpet extraction or windows, supervision, call-backs, overtime and holiday pay, and card fees. Quote periodic work separately.
Is the result a market rate for my area?
No. It is a price built from your own inputs. It is not a statement of local market rates and not financial, tax or legal advice.
Build your next bid from your own costs and get a client-ready proposal.
Open the free calculator